445nm 1600mW Blue Laser Module Engraver Pack not only comes with the laser module used for creative engraving but is also specially equipped with relevant parts such as safety goggles, installation bracket, and screws, allowing you to use the laser quickly and safely with ease.
445nm 1600mW Laser Module Engraver Pack can be used at different cutting and engraving intensities, according to the operation settings on the software, thereby allowing you to produce your very own creative work.
This laser module is compatible with software such as mLaser, mDraw, Benbox, etc. When used together with such software, you can engrave various designs on materials such as wood board, cardboard, leather, and acrylic.
During laser engraving process, the safety goggles can effectively protect your eyes from laser injury.
2.Velcro Sticker Pad for Laser Head
Sticking the Velcro pad onto to the laser module will prevent excessive laser light scattering during use.
Velcro sticker pad for Laser head: In order to avoid excessive scattering of laser, we specially designed Velcro sticker pad for Laser head. Only one step needed to install the Velcro sticker pad to laser head.
The laser has separate positive and negative terminals. When the positive and negative terminals are connected reversely, the laser will not shine light. At this time, you need only to switch the connecting cables of the positive and negative terminals around.
|4×White Nylon Cable Tie 1.9*100||1×Orange Power Plug 3.96-2P||4×M4*8 Semi-round Hexagon Screw|
|4×M3*8 Cross Head screw||1×Interchangeable Screwdriver||1×3*6 Right Angle Bracket|
|1×Laser Module Engraver Pack Warning Card||1×Velcro Sticker Pad 50*160mm||1×445nm 1600mW Blue Laser Module|
|1×Acrylic Bracket||1×Safety Goggles|
Laser Technical Specification
|Product Dimension||Φ33mm X 79mm|
|Best Engraving Distance||20-50mm|
|Light Spot Precision||≤1mm|
|Focus Mode||Adjustable Focal Distance|
|Damage Ratio of Lens||10%|
|Actual Light Power||1.3W|
|Operating Voltage||DC 12V ± 30%|
|Diameter Of Beam||5mm|
|Light Spot | Divergence Angle||≤1°|
|Light Spot | Concentricity||≤0.02°|
|Continuous Working Hours||≤5h|
|Operating Life||6000 Industrial Hours|
|Engraving Materials||Dark Flammable Objects|
|Laser Level||IV (Caution: DO NOT directly irradiate eye or skin with the laser beam over 50mW.)|
|Operating Temperature||-40℃ ~ 50℃|
|Storage Temperature||-50℃ ~ 60℃|
|Cardboard||up to 0.8mm||YES|
|Wood Board||up to 0.6mm||YES|
|Rubber Sheet||up to 0.5mm||YES|
|Foam Paper||up to 3mm||Engraves|
|Dark Colored Cloth (denim cloth,
cotton cloth and linen)
|up to 1mm||YES|
|Urethane Sheet||up to 0.8mm||YES|
※1. Only suitable for use on black opaque acrylic