Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT

Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT
Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT
Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT
Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT
Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT
Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT
Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT
Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT
Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT
Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT

Omschrijving

The VL6180X (sometimes called the VL6180) is a Time of Flight distance sensor like no other you've used! The sensor contains a very tiny laser source, and a matching sensor. The VL6180X can detect the "time of flight", or how long the laser light has taken to bounce back to the sensor. Since it uses a very narrow light source, it is good for determining distance of only the surface directly in front of it.

Unlike sonars that bounce ultrasonic waves, the 'cone' of sensing is very narrow. Unlike IR distance sensors that try to measure the amount of light bounced, the VL6180X is much more precise and doesn't have linearity problems or 'double imaging' where you can't tell if an object is very far or very close.

This is the 'little sister' of the Adafruit VL53L0X ToF sensor, and can handle about 5mm to 200mm of range distance. It also includes a lux sensor. If you need a larger range, check out the VL53L0X which can measure 30 - 1000 mm.

The sensor is small and easy to use in any robotics or interactive project. Since it needs 2.8V power and logic we put the little fellow on a breakout board with a regulator and level shifting. You can use it with any 3-5V power or logic microcontroller with no worries. Each order comes with a small piece of header. Solder the header onto your breakout board with your iron and some solder and wire it up for instant distance-sensing-success!

Communicating to the sensor is done over I2C with some simple commands. Most of the work is handled inside the sensor itself, so its very easy to port our Arduino library to another microcontroller.

Reviews

Verlanglijst Adafruit VL6180X Time of Flight Distance Sensor - 5 to 100mm - STEMMA QT
Productcode: ADA-3316
€ 13,64
Excl. BTW
  • 10 stuk(s) direct uit voorraad leverbaar
  • Voor 17:00 uur besteld, is vandaag verzonden
  • Verzonden vanaf € 8,91 naar Verenigde Staten
  • 30 dagen niet goed, geld terug
  • Snelle levering vanuit Nederland

Specificaties

Algemeen
ProductcodeADA-3316
MerkAdafruit
MPNP3316
PlatformSTEMMA

Misschien vind je deze ook interessant

De Sharp GP2Y0A02YK infrarood afstandssensor is in staat om continu de afstand te meten tot een object. Het bruikbare bereik reikt van 20 cm tot 150 cm.
€ 10,70 Excl. BTW
De Sharp GP2Y0A21YK0F is een afstandssensor die infrarood gebruikt om de afstand tot het voorwerp te meten. Dit apparaat geeft de spanning door die overeenkomt met de detectieafstand. Deze sensor kan dus ook als nabijheidssensor gebruikt worden.
€ 9,88 Excl. BTW
Dit is de HC-SR04 ultrasone afstandsensor. Deze voordelige sensor biedt 2 cm tot 400 cm contactloze meetfunctionaliteit met een afstandsnauwkeurigheid die kan oplopen tot 3 mm.
€ 4,55 Excl. BTW
De Grove - Digital Distance Interrupter 0.5 to 5cm is een infrarood omgevingssensor module gebaseerd op GP2Y0D805Z0F.
€ 8,68 Excl. BTW
Snelle verzending
Voor 17.00 uur besteld (ma-vr), is zelfde dag verzonden.
Niet goed, geld terug
Bij ons heb je een zichttermijn van 30 dagen.
Wereldwijde verzending
Wij verzenden vanuit Nederland met PostNL en DHL.
Thuiswinkel.org Lid