Categorieën

Mini 2-draads Volt Meter (3.2 - 30 VDC)

-20% Mini 2-draads Volt Meter (3.2 - 30 VDC)
0 - 0 beoordeling(en).
Artikelcode: ADA-460

€ 8,95 € 7,16 Excl. BTW: € 5,92
9 op voorraad voor directe levering.
Vandaag besteld, dinsdag in huis.

Deze aanbieding verloopt in:
Aantal: In winkelwagen

Hoeveelheid Per stuk
10+€ 8,28 (Excl. BTW: € 6,84)
50+€ 7,61 (Excl. BTW: € 6,29)
  • Gratis verzending vanaf € 50 binnen Nederland, België en Duitsland
  • Verzending via PostNL & UPS
  • Snelle levering uit eigen NL magazijn

Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 2-wire version of the volt meter, two wires are used to power it and measure at the same time. We also have a 3-wire version that measure a wider range of voltages.

Simply connect the red wire to the positive supply, and black to negative ground. The display has a microcontroller that will read the voltage, compare it to a stable reference and display the voltage with 0.1V precision on a 3-digit 7-segment display. It works from 3.2V up to 30V so it will be good for nearly any electronic project! The meter draws 3-4mA to power the microcontroller and display. This particular LED display is a nice vivid green, which we found very readable. Mounting tabs make this module easy to attach to any box or plate.

Technical Details

Dimensions

  • PCB (with mounting holes): 33mm x 15mm / 1.3" x 0.6"
  • Display: 23mm x 14mm / 0.9" x 0.6"0
  • Combined Depth: 10mm / 0.4"
  • Weight: 4.8g

Power specifications

  • 3.2V to 30V DC measurements
  • 0.1V precision
  • 3-4mA draw
  • Green LED display
  • Use with positive voltages only!
Product
Merk: Adafruit
Er zijn geen beoordelingen voor dit product.

Beoordeel

Je naam:


Je beoordeling: Note: HTML-code wordt niet vertaald!

Oordeel: Slecht           Goed

Voer onderstaande code in: