Gratis verzending vanaf € 75
binnen Nederland

Snel in huis
Verzonden vanuit Nederland

Wereldwijde verzending
Naar elke bestemming met UPS

Thuiswinkel Waarborg


Bitscope Blade Duo Pi

Bitscope Blade Duo Pi
0 beoordeling(en).

Artikelcode: BS-BB02A
€ 59,95 Excl. BTW: € 49,55
5 stuk(s) direct uit voorraad leverbaar.

Aantal: In winkelwagen
Hoeveelheid Per stuk
10+€ 56,95 (Excl. BTW: € 47,07)
50+€ 53,95 (Excl. BTW: € 44,59)

BitScope Blade Duo Pi is a power and mounting solution for two Raspberry Pi and (optionally) Touchscreen Display.

It's perfect for building industrial strength stand-alone fail-safe server solutions with Raspberry Pi.

Key Features

  • Powers up to two Raspberry Pi.
  • Works with Pi 7" Touch Display.
  • Powerful switch mode supply.
  • Can use 9V to 48V power source.
  • Compatible with 12V & 24V UPS.
  • Use with standard PoE solutions.
  • Power external USB HDD & SSD.
  • Up to 8 connected USB devices.
  • Rack mount solutions available.
  • 4 x 3mm mounting + stand-offs.
  • Power tabs for "cable free" use.
  • Low cost, light weight and generates very little heat.
  • A complete industrial quality, reliable power and mounting solution for Raspberry Pi.

The HDMI and Audio ports are accessible from the Raspberry Pi in slot One so it can be used as a workstation with the addition of a monitor, keyboard and mouse. The second (or both) Raspberry Pi can be used as a headless server connected (via a switch) to the first Raspberry Pi or other computers on the network. It is also possible to network connect the Raspberry Pi using low cost WiFi dongles or via direct CAT5 connection between the ethernet ports.

Duo Pi accepts supply voltages ranging from 9V to 48V making it compatible with 9V, 12V, 24V and 48V power sources and it can provide up to 3A continuously and 4A surge current for the Raspberry Pi and any connected devices such as hard disks or SSD, BitScopes and other USB peripherals. Duo Pi can be used with simple plug packs, 12V batteries, unregulated power sources such as PV solar panels, low cost uninterruptible power supplies (UPS) and even passive power over ethernet (PoE) solutions.

External power is connected via an industry 2.5mm socket on the board. Alternatively power may be applied via the mounting tabs at the blade edges. The latter connection option makes it possible to mount Duo Pi in Packs and Racks without power wiring. Insulating 3mm stand-offs are included for stand-alone desk or wall mounting and custom case solutions may be 3D printed (designs available) for convenient portability.

Individual power, reset and interrupt control is provided for each Raspberry Pi so they may be individually powered down, reset and/or replaced. This is convenient in racks and clusters allowing servicing without powering down the entire rack.


Compatible Raspberry Pi Models Raspberry Pi 3, 2, B+, A+ and Pi Zero
Supports Raspberry Pi Display Yes (optional wall mount).
Raspberry Pi per Unit 2
USB Ports per Unit 8
HDMI & sound outputs Yes (Raspberry Pi slot 1)
Primary Power 5V (Raspberry Pi J8 & USB)
Auxilliary Power Yes (5V via header)
Indicator LEDs Board Power & Devices Available
Device power-down header Yes
Processor reset/interrupt Yes
Blade mount tabs Vcc & Gnd with M3 holes
Raspberry Pi mounts M2.5 per HAT specification
Mounting feet included Yes
19" rack compatible 5RU (with metalwork option)
DIN Rail compatible Yes (with DIN rail option)
Power budget 4A (peak), 3A (continous)
UPS compatible Yes (includes blocking diode)
PoE compatible Yes (with passive PoE cable)
Power Requirement 9V (4A) ~ 48 V (500mA)
Operating Temperature 0 °C to 40 °C
Storage Requirements -40 °C ~ +40 °C / 5 % ~ 95 % RH
Dimensions (W x D x H) 65 x 160 x 25 mm
Weight (Net) 64g
Merk: BitScope
EAN: 9349078000309
Er zijn geen beoordelingen voor dit product.


Je naam:

Je beoordeling: Note: HTML-code wordt niet vertaald!

Oordeel: Slecht           Goed

Voer onderstaande code in: