We zijn er weer! Volg ons herbouwproces na de brand op onze blog (updated 26/08).

Gratis verzending vanaf € 75
binnen Nederland

Snel in huis
Verzonden vanuit Nederland

Wereldwijde verzending
Naar elke bestemming met UPS

Thuiswinkel Waarborg

Categorieën

Raspberry Pi Compute Module 3 Development Kit

Niet meer leverbaar Raspberry Pi Compute Module 3 Development Kit
0 beoordeling(en).

Artikelcode: KW-1783
€ 109,95 Excl. BTW: € 90,87
Niet op voorraad. Niet meer leverbaar

Dit artikel is momenteel niet beschikbaar voor backorder.

Raspberry Pi Approved ResellerThis is the main development kit I/O board into which the Compute Module SODIMM board is connected. It also contains all of the necessary interface ports to allow an engineer to design and test their own prototype application. The modules simplify the design process engineers need to undertake when developing a System on Module (SoM) solution into their final product. Engineers do not need to concern themselves with the complexities of interfacing with the BCM2837 processor directly and instead can concentrate on designing the interfaces to their own I/O board and their application software . This simplicity fosters rapid development. A Raspberry Pi Compute Module I/O Board Camera Display Adaptor is included in the kit to connect a standard Raspberry Pi camera board or Raspberry Pi display to the Compute Module I/O Board.

The Compute Module contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM). The accompanying IO Board is a simple, open-source breakout board that you can plug a Compute Module into. The board hosts 120 GPIO pins, an HDMI port, a USB port, two camera ports, and two display ports. Designing the Module into a custom system should be relatively straightforward as we’ve put all the tricky bits onto the Module itself, and you have the freedom to add extra components and place parts exactly where your product needs them.

Features

  • Multiple GPIO interfaces on 2 60 way 0.1" Headers
  • 1 x Micro USB connector type B - USB Slave
  • 1 x USB connector type A - USB Host
  • 2 x CSI ports for camera boards
  • 2 x DSI ports for display boards
  • Full size HDMI port
  • Micro USB power connector
  • Micro SD connector
  • SOFTWARE - ARMv7 Instruction Set, and a mature and stable Linux software stack

Contents

  • Raspberry Pi Compute Module I/O Board
  • Raspberry Pi Compute Module 3
  • Raspberry Pi Compute Module 3 Lite
  • Raspberry Pi Compute Module I/O Board Camera Display Adaptor
  • 5V 2.5A Power Supply
  • USB A to micro B cable
  • 4x Jumper wires
Product
Merk: Raspberry Pi Foundation
MPN: RPI-COMPUTE3-KIT
Er zijn geen beoordelingen voor dit product.

Beoordeel

Je naam:


Je beoordeling: Note: HTML-code wordt niet vertaald!

Oordeel: Slecht           Goed

Voer onderstaande code in: