SparkFun Analog/Digital MUX Breakout - CD74HC4067

SparkFun Analog/Digital MUX Breakout - CD74HC4067
SparkFun Analog/Digital MUX Breakout - CD74HC4067
SparkFun Analog/Digital MUX Breakout - CD74HC4067
SparkFun Analog/Digital MUX Breakout - CD74HC4067
SparkFun Analog/Digital MUX Breakout - CD74HC4067
SparkFun Analog/Digital MUX Breakout - CD74HC4067

Description

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip's address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins!

Since the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc.

The internal switches are bidirectional, support voltages between ground and VCC, have low "on" resistance and low "off" leakage, and to prevent crosstalk, perform "break-before-make" switching. The board also breaks out the chip's "enable" pin, which when driven high, will completely disconnect the common pin (all switches "off").

Features

  • 2V to 6V operation
  • "On" resistance: 70 Ohms @ 4.5V
  • 6ns break-before-make @ 4.5V
  • Wide operating temperature range: -55C to 125C

Reviews

Add to Wish List SparkFun Analog/Digital MUX Breakout - CD74HC4067
Product Code: SF-BOB-09056
€ 5.74
Ex. VAT
10 or more € 5.46 Ea. (-5%)
Need larger quantities? Ask for a quote!
  • 5 piece(s) in stock
  • Shipped on Friday when ordered now.
  • Shipping from € 8.91 to United States
  • 30 days money back guarantee
  • Fast shipping from The Netherlands

Specifications

General
Product CodeSF-BOB-09056
BrandSparkFun Electronics
MPNBOB-09056

You might like these as well

This I2C multiplexer allows you to connect up to 8 I2C devices with the same address to the same microcontroller.
€ 6.57 Ex. VAT
Grove - 8 Channel I2C Hub, you can plug up to 8 same-address I2C devices to the same Grove I2C system.
€ 6.20 Ex. VAT
Mux Shield II for Arduino
€ 27.23 Ex. VAT
The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature.
€ 34.67 Ex. VAT
Fast shipping
Order before 17:00h (Mon-Fri) for same day shipping.
Money back guarantee
You have a 30-day return period on your order
Worldwide shipping
Shipped from the Netherlands using PostNL and DHL.