PiJuice - A Portable Power Platform For Every Raspberry Pi

PiJuice - A Portable Power Platform For Every Raspberry Pi
PiJuice - A Portable Power Platform For Every Raspberry Pi
PiJuice - A Portable Power Platform For Every Raspberry Pi
PiJuice - A Portable Power Platform For Every Raspberry Pi
PiJuice - A Portable Power Platform For Every Raspberry Pi
PiJuice - A Portable Power Platform For Every Raspberry Pi
PiJuice - A Portable Power Platform For Every Raspberry Pi
PiJuice - A Portable Power Platform For Every Raspberry Pi

Omschrijving

Maak van je Raspberry Pi een mobiel, zelfoplaadbaar systeem met de PiJuice!  Dit is een Uninterruptible Power Supply (UPS) die er voor zorgt dat je Pi altijd stroom heeft. 

Dankzij de revolutionaire PiAnywhere technologie in elke PiJuice HAT is het mogelijk om je Pi overal mee naar toe te nemen. De Real Time Clock (RTC) op het board laat je Pi weten hoe laat het is, zelfs als er geen stroom input of internet connectie is. Daarnaast is dit een geïntegreerde microcontroller (MCU) chip die ondermeer zorgt voor een soft-shutdown functionaliteit.

Je zal altijd zicht hebben op de oplaad-levels en andere info met de ingebouwde drie-kleurige RGB LEDs en trigger events en scripts met drie programmeerbare knoppen. Omdat de PiJuice maar vijf van je GPIO pins gebruikt (alleen stroom en I2C) zijn de rest voor jou om te gebruiken. De stacking header laat je je andere HATs en add-ons gebruiken met de PiJuice.

Power je Raspberry Pi met wind, zon of andere energie!

Geïntegreerde stroom is één ding, maar wat als je een Raspberry Pi ook op groene stroom kan laten werken? Zon, wind, water en andere groene stroom is gratis, schoon en een goedkope oplossing voor de Raspberry Pi. De PiJuice is self-monitoring en, net als een ruimte satelliet, kan deze als  een volledig autonoom systeem gebruikt worden. Gebruik de PiJuice als een deel van een zelfstandig camerasysteem, weerstation, off-grid desktops of wat voor buiten project dan ook!

PiJuice specificaties:

  • Onboard 1820 mAh off the shelf Lipo / LiIon battery for ~4 to 6 hours in constant use! (with support for larger Lipo Battery of 5000 or 10,000 mAH+ to last up to 24 hrs +)
  • A Full Uninterrupted / Uninterruptible Power Supply (UPS) solution
  • Designed for all Raspberry Pi's with 40-pin headers
  • Integrated Real Time Clock
  • Onboard intelligent on/off switch
  • Low power deep-sleep state with wake on interrupt/calendar event
  • Programmable multi-colored RGB led (x2) and buttons (x3) with super simple user-configurable options
  • Hardware watchdog timer to keep your Raspberry Pi on and working in mission-critical remote applications
  • Our revolutionary PiAnywhere technology - the best way to take your Pi off the grid!
  • Full power management API available to Raspberry Pi OS with auto shutdown capability when running low on batteries
  • Raspberry Pi HAT compatible layout, with onboard EEPROM for easy plug and play operation
  • Low profile design to fit inside lots of existing Raspberry Pi cases!
  • Enhanced graphical user interface (GUI) available for easy install (via APT)
  • Customisable scripts for enhanced flexibility and full report of battery status
  • All GPIOs available via stackable header for ease of expandability and connectivity
  • Charge via on-board micro USB or via the Raspberry Pi micro USB (or from onboard pin headers)
  • Batteries can be charged from different type of sources and voltages
  • Replace the battery without downtime. Compatible with any single cell LiPo or LiIon battery
  • Fully CE and FCC tested design. Battery safety tested also.

Technical Information

  • The EEPROM can be disabled and its I2C address changed for increased compatibility with other boards
  • BP7X battery - original battery from Motorola Droid 2 (A955) - 1820mAh battery
  • Microcontroller is an ST Micro STM32F030CCT6 ARM Cortex-M0, 48MHz, F64KB, R8KB, I2C, SPI, USART, 2.4-3.6V
  • Charge IC - BQ24160RGET Charger IC Lithium-Ion/Polymer, 2.5A, 4.2-10V
  • Fuel gauge IC - LC709203FQH-01TWG Battery Fuel Gauge, 1-Cell Li-ion, 2.8%
  • EEPROM - CAT24C32WI-GT3 EEPROM, I2C, 32KBIT, 400KHZ, 1V7-5V5
  • Optional spring pin - Mil-Max 0929-7-15-20-77-14-11-0
  • Compatible with any 4 pin battery on board that can be used with 00-9155-004-742-006 battery contacts from AVX including the BP7X, BP6X, and any compatible batteries including the 1600mAh and 2300mAh ones from CameronSino (CS-MOA853SL and CS-MOA855XL)
  • There is an on board 4 pin screw terminal block for larger off board batteries. Any single cell LiPo / LiIon is compatible. However, you use your own sourced battery at your own risk. We HIGHLY RECOMMEND using a battery with an internal protection circuit and a NTC (temp sensor)
  • Optional header for offboard button - connected to same output as SW1
  • 6 pin breakout header - with two GPIO from the ARM Cortex-M0, Vsys, 5v0, 3v3, GND connections
  • Header for optional off board solar panel / wind turbine etc.
  • Optional RF Shield attachment - Harwin S02-20150300 (can also double as an inexpensive heatsink)
  • Input voltage range - 4.2V 10V
  • Output voltage - 3.3V and 5V
  • Output amperage - maximum current at 5V gpio is 2.5A and at VSYS output 2.1A, but also this depends heavily on battery capacity. For BP7X have measured around 1.1A at 5V GPIO and around 1.6A at VSYS output. Obviously, this also depends heavily on the current draw demanded by the Raspberry Pi/device itself. To achieve a maximum of 2.5A it will need battery over 3500mAh.
  • Boxed weight - 96g
  • Boxed dimensions - 12.2 x 10.8 x 3.5 cm
  • Unboxed weight - 57g
  • Unboxed dimensions - 6.5 x 5.6 x 2 cm

PiJuice HAT box contains

  • 1 x PiJuice HAT
  • 1 x Battery and battery surround
  • 1 x PiJuice guide
  • 4 x Mounting posts attached to PiJuice
  • 8 x Mounting screws (4 are already assembled to the board)
  • 1 x Pogo pin
  • 3 x Sticker

Reviews

Verlanglijst PiJuice - A Portable Power Platform For Every Raspberry Pi
Productcode: KW-2447
€ 57,81
Excl. BTW
Dit product is niet op voorraad
  • Verzonden vanaf € 8,91 naar Verenigde Staten
  • 30 dagen niet goed, geld terug
  • Snelle levering vanuit Nederland

Specificaties

Algemeen
ProductcodeKW-2447
MerkPiSupply
EAN616909467655
MPNPIS-0212
PlatformRaspberry Pi (ARM)
Geschikt voorRaspberry Pi 4

Misschien vind je deze ook interessant

De Raspberry Pi 3B+ is het laatste board in de Raspberry Pi 3 reeks en is een evolutie van de Raspberry Pi 3 Model B.
€ 37,15 Excl. BTW
De Li-ion Battery HAT heeft een SW6106 power bank management chip waardoor hij 5V gereguleerde stroom kan leveren aan je Pi met een 14500-type batterij waardoor je Pi draagbaar kan worden.
€ 18,97 Excl. BTW
Het PiJuice 6 Watt zonnepaneel is de ideale manier om je PiJuice HAT en Raspberry Pi gratis op te laden in de zon. Met de gecombineerde technologie van zonnepanelen en PiAnywhere kan je je Pi echt overal mee naartoe nemen!
€ 41,28 Excl. BTW
Het PiJuice 12 Watt zonnepaneel is de ideale manier om je PiJuice HAT en Raspberry Pi gratis op te laden in de zon. Met de gecombineerde technologie van zonnepanelen en PiAnywhere kan je je Pi echt overal mee naartoe nemen!
€ 64,42 Excl. BTW
Het PiJuice 22 Watt zonnepaneel is de ideale manier om je PiJuice HAT en Raspberry Pi gratis op te laden in de zon. Met de gecombineerde technologie van zonnepanelen en PiAnywhere kan je je Pi echt overal mee naartoe nemen!
€ 85,91 Excl. BTW
Snelle verzending
Voor 17.00 uur besteld (ma-vr), is zelfde dag verzonden.
Niet goed, geld terug
Bij ons heb je een zichttermijn van 30 dagen.
Wereldwijde verzending
Wij verzenden vanuit Nederland met PostNL en DHL.
Thuiswinkel.org Lid