In verband met COVID-19 is onze afhaalbalie momenteel gesloten. Bestellingen verwerken en verzenden wij binnen 1-3 werkdagen. Bedankt voor je begrip. Meer informatie.

Gratis verzending vanaf € 75
binnen Nederland

Snel in huis
Verzonden vanuit Nederland

Wereldwijde verzending
Naar elke bestemming met UPS

Thuiswinkel Waarborg

Categorieën

Lipo Rider Plus (Charger/Booster) - 5V/2.4A USB Type C

Niet op voorraad Lipo Rider Plus (Charger/Booster) - 5V/2.4A USB Type C
0 beoordeling(en).

Artikelcode: SS-106990290
€ 5,95 Excl. BTW: € 4,92
Niet op voorraad
Dit artikel staat in bestelling bij onze leverancier. Wij verwachten 50 stuk(s) te ontvangen. Levertijd is helaas nog onbekend.

Aantal: In winkelwagen
Hoeveelheid Per stuk
10+€ 5,77 (Excl. BTW: € 4,77)
50+€ 5,59 (Excl. BTW: € 4,62)

The Lipo Rider Plus from Seeed is not only a Fast Charger but also a Strong PowerBoost, supports up to 5V/2A charging current, boost output integration, output up to 5V/2.4A, can also output 3.3V /250mA. The 3.3V output is normally on, and the 5V output supports IO control or manual switch, which means you can use 3.3V to supply power for a microcontroller and use the I/O of this microcontroller to control the 5V output, totally programmable.

Simply put, the Lipo Rider Plus can charge the Lipo battery much faster, at the same time it can provide strong power for the slave device. Oops, forgot to introduce the difference between the Lipo rider and the traditional Lipo charger.  
 

Lipo Rider VS Lipo Charger 

As we know, the traditional Lipo Charger can charge the lithium battery. Well, usually they can only charge. But what can a Lipo Rider do?  

Charging the lithium battery

Use the battery to power the device

Not only a charger but also a power supply and a booster. With the help of Lipo Rider Plus, you can input a 3.7V lipo battery, and output up to 5V/2.4A via the USB Type-A port. With the on-board switch, you can control the ON/OFF of USB port easily. Meanwhile, we provide the full function pin header, which can output 3.3V/250mA as well.   

 Lipo Rider Plus VS Lipo Rider & Lipo Rider Pro

You may find that we've already released the Lipo Rider V1.3 and Lipo Rider Pro, so, what's the difference between Seeed Lipo Rider? In short, both LiPo Rider Pro and Lipo Rider v1.3 have two JST2.0 Port, which allows you to use a solar panel to charge a lipo battery. 

However, the Lipo Rider Plus only has one JST2.0 port. Hence, it can not use a solar panel as the power source. The good news is that Lipo Rider Plus has become more compact, it is almost half the size of LiPo Rider Pro and Lipo Rider v1.3, you can easily mount it in any project. More importantly, its performance is much stronger than its two predecessors.  All in all, if you need to work with solar panels, then LiPo Rider Pro and Lipo Rider v1.3 are right for you; if you want to experience fast charging, then Lipo Rider Plus will be your best choice. 

Of course, Lipo Rider Plus can charge the Lipo battery, and it is very fast, 5V/2A, 10W charging power, what a flying experience.

Features 

  • Up to 5V / 2A charging current - USB Type C
  • Up to 5V / 2.4A output current - USB Type A
  • Provides 3.3V / 250mA output -  Pin Header
  • Support for shutdown output (IO control/manual switch)
  • Onboard charge status indicator LED + Onboard 4-segment power indicator LED
  • Ultra-small  2.5cm*4.1cm
  • Single-layer layout easy mount.

 

Hardware Overview

Product
Merk: Seeed Studio
MPN: 106990290
Er zijn geen beoordelingen voor dit product.

Beoordeel

Je naam:


Je beoordeling: Note: HTML-code wordt niet vertaald!

Oordeel: Slecht           Goed

Voer onderstaande code in: