SparkFun RedBoard Artemis Nano

SparkFun RedBoard Artemis Nano
SparkFun RedBoard Artemis Nano
SparkFun RedBoard Artemis Nano
SparkFun RedBoard Artemis Nano
SparkFun RedBoard Artemis Nano
SparkFun RedBoard Artemis Nano
SparkFun RedBoard Artemis Nano
SparkFun RedBoard Artemis Nano

Omschrijving

The Artemis Nano is a party on the front and business on the back. And that's by design! All the important LEDs, connectors, labels, and buttons are presented on the front for the best user experience with all the supporting circuitry on the rear of the board. The RedBoard Artemis Nano is a minimal but extremely handy implementation of the Artemis module. A light weight, 0.8mm thick PCB, with on board LiPo-battery charging and a Qwiic connector, this board is easy to implement into very small projects. A dual row of ground connections make it easy to add lots of buttons, LEDs, and anything that requires its own GND connection. At the same time, the board is breadboard compatible if you solder the inner rows of pins.

A modern USB-C connector makes programming easy. The Nano is fully compatible with the SparkFun's Arduino core and can be programmed easily under the Arduino IDE. We've also exposed the JTAG connector for more advanced users who prefer to use the power and speed of professional tools. If you're looking for a simple, cost-effective board to replace your aging Arduino Uno or Arduino Nano, look no further. We've even added a digital MEMS microphone for folks wanting to experiment with always-on voice commands with TensorFlow and machine learning.

With 1MB flash and 384k RAM you'll have plenty of room for your sketches. The Artemis module runs at 48MHz with a 96MHz turbo mode available and with Bluetooth to boot!

The SparkFun Artemis Nano is an incredibly flexible device for a small footprint but if you're looking for all the bells and whistles, be sure to checkout our RedBoard and ATP footprints for even more I/O and capabilities.

Reviews

Verlanglijst SparkFun RedBoard Artemis Nano
Productcode: SF-DEV-15443
€ 16,49
Excl. BTW
  • 9 stuk(s) direct uit voorraad leverbaar
  • Voor 17:00 uur besteld, is vandaag verzonden
  • Verzonden vanaf € 8,91 naar Verenigde Staten
  • 30 dagen niet goed, geld terug
  • Snelle levering vanuit Nederland

Documentatie

Hookup guide

Specificaties

Algemeen
ProductcodeSF-DEV-15443
MerkSparkFun Electronics
MPNDEV-15443

Misschien vind je deze ook interessant

Een USB-A naar USB-C kabel van 1 meter, te gebruiken om bijvoorbeeld je telefoon of tablet op te laden.
€ 6,57 Excl. BTW
De Nano 33 BLE (met headers) is Arduino's 3.3V-compatibele bord in de kleinst beschikbare vormfactor: 45x18mm!
€ 25,58 Excl. BTW
Snelle verzending
Voor 17.00 uur besteld (ma-vr), is zelfde dag verzonden.
Niet goed, geld terug
Bij ons heb je een zichttermijn van 30 dagen.
Wereldwijde verzending
Wij verzenden vanuit Nederland met PostNL en DHL.
Thuiswinkel.org Lid