SparkFun Weather Shield

SparkFun Weather Shield
SparkFun Weather Shield
SparkFun Weather Shield
SparkFun Weather Shield
SparkFun Weather Shield
SparkFun Weather Shield

Omschrijving

The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and GPS for location and super accurate timing.

The Weather Shield utilizes the Si7021 humidity/temperature sensor, the MPL3115A2 barometric pressure sensor and the ALS-PT19 light sensor. The shield relies on the Si7021 and MPL3115A2 Arduino libraries.

Each shield comes with two unpopulated RJ11 connector spaces (for optional hookup of rain and wind sensors) and a 6-pin GPS connector (for optional hookup of a GP635T GPS module). Finally, each Weather Shield can operate from 3.3V up to 16V and has built-in voltage regulators and signal translators.

Features

  • Humidity/Temperature Sensor — Si7021
  • Barometric Pressure — MPL3115A2
  • Light Sensor — ALS-PT19

Note: The Weather Shield comes as a stand-alone board. Headers, connectors and additional sensors will need to be purchased separately.

Note: This shield was designed for 5V boards, such as the SparkFun RedBoard and Arduino Uno. It will not work with 3.3V boards (like the Arduino Yun, for example) without modification.

Reviews

Verlanglijst SparkFun Weather Shield
Productcode: SF-DEV-13956
€ 38,80
Excl. BTW
  • 3 stuk(s) direct uit voorraad leverbaar
  • Voor 17:00 uur besteld, is vandaag verzonden
  • Verzonden vanaf € 8,91 naar Verenigde Staten
  • 30 dagen niet goed, geld terug
  • Snelle levering vanuit Nederland

Specificaties

Algemeen
ProductcodeSF-DEV-13956
MerkSparkFun Electronics
MPNDEV-13956
PlatformArduino
Geschikt voorArduino

Misschien vind je deze ook interessant

De Arduino Uno is het beste board om met elektronica en coderen te beginnen. De Uno is het meest gebruikte en best gedocumenteerd van de Arduino familie.
€ 20,62 Excl. BTW
Complete set stapel headers om Arduino shields te kunnen stapelen. Compatible met Arduino Uno en Leonardo shields.
€ 2,07 Excl. BTW
Het SparkFun RedBoard combineert de eenvoud van de Optiboot bootloader van de UNO en de stabiliteit van de FTDI.
€ 21,45 Excl. BTW
The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials.
€ 6,57 Excl. BTW
The SparkFun OpenLog is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB.
€ 16,94 Excl. BTW
Snelle verzending
Voor 17.00 uur besteld (ma-vr), is zelfde dag verzonden.
Niet goed, geld terug
Bij ons heb je een zichttermijn van 30 dagen.
Wereldwijde verzending
Wij verzenden vanuit Nederland met PostNL en DHL.
Thuiswinkel.org Lid