Gratis verzending vanaf € 75
binnen Nederland

Snel in huis
Verzonden vanuit Nederland

Wereldwijde verzending
Naar elke bestemming met UPS

Thuiswinkel Waarborg

Categorieën

13.56MHz RFID/NFC kaart - 1KB

Niet op voorraad 13.56MHz RFID/NFC kaart - 1KB
0 beoordeling(en).

Artikelcode: KW-1706
€ 2,95 Excl. BTW: € 2,44
Niet op voorraad

Aantal: In winkelwagen
Hoeveelheid Per stuk
10+€ 2,88 (Excl. BTW: € 2,38)
50+€ 2,81 (Excl. BTW: € 2,32)

This is a blank 13.56MHz RFID/NFC card, often used for train/bus passes but also found in other systems where a proximity card is desired. The card contains a small RFID chip and an antenna, and is passively powered by the reader/writer when placed a few centimeters away.

These can be read by most 13.56MHz RFID/NFC readers, but make sure it can handle ISO/IEC 14443 Type A cards as there are a few other encoding standards (like FeLica). They are tested and work great with both Adafruit's PN532 NFC/RFID breakout board and NFC/RFID Shield for Arduino, and also with the NXP PN7150S boards for Arduino or Raspberry Pi!

These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.

These use a ISO/IEC 14443 Type A chipset, which used to be the 'classic' NFC chipset. In 2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support it. This only matters if you're trying to use this tag with a phone/tablet.

Product
MPN: P359
Er zijn geen beoordelingen voor dit product.

Beoordeel

Je naam:


Je beoordeling: Note: HTML-code wordt niet vertaald!

Oordeel: Slecht           Goed

Voer onderstaande code in:



Tags: nfc, rfid